top of page

WATER SOFTENING INSERTS

WATER SOFTENING INSERT WITH POLYPHOSPHAT FILLER
Vložek za vodni filter s polyphosphati

The insert consists of a plastic housing made of polypropylene and filament in the form of polyphosphate crystals, which prevent the formation of limescale and corrosion on water heaters, washing machines, faucets and pipes. Treated water can be heated to 75 ° C, above this temperature polyphosphati lose their effectiveness.

Mere vodnega vložka

Working conditions:

  • Max. temperature: 35 ° C

  • Low temperature: 4 ° C

  • Maximum hardness: 500 ° f (500ppm)

Features:

  • Polypropylene filter housing

  • Replacement every 6 months

  • No maintenance required

  • Recommended installation pre-filter cartridge protection

  • Polyphosphate crystals

Vložek za vodni filter s polyphosphati vratni z oringi

SX

BX

INSERT FOR SOFTENING WATER WITH CATIONIC  MASO

The cartridge consists of a plastic container (PP) and a strong cation exchange resin to reduce water hardness. Softening with this type of filameton also eliminates calcium and magnesium minerals. Changing the cartridge depends on the hardness of the water. To check when the cartridge needs to be replaced, we recommend a water hardness test.

Vložek za mehčanje vode s kationsko maso

Working conditions:

  • Max. temperature: 35 ° C

  • Low temperature: 4 ° C

  • Max Cl concentration: 0.1ppm

  • Max  Fe concentration: 0.1ppm

Features:

  • Suitable for drinking water

  • Filament: Cationic mass

  • Other plastic parts of polypropylene

  • Flat seals with microbiological protection

  • Replace the cartridge as needed

  • Pre-filter installation recommended

Mere vodnega vložka
Graf naraščanja trdote vode po pretočeni količini
DEMINALIZATION INSERT  WATER WITH CATION-ANION  MASO

The cartridge consists of a plastic container (PP) and  strong cation and  strong anion exchange resin to reduce water salinity. The filament of the cartridge changes color when it wears out, at which point the cartridge needs to be replaced.

Vložek za deminaralizacijo vode s kation-anion maso

Working conditions:

  • Max. temperature: 35 ° C

  • Low temperature: 4 ° C

  • Max Cl concentration: 0.1ppm

  • Max  Fe concentration: 0.1ppm

Features:

  • Suitable for drinking water

  • Filament: Cationic mass + anion mass

  • Reduces mineral content

  • Other plastic parts of polypropylene

  • Flat seals with microbiological protection

  • Replace the cartridge as needed

  • Pre-filter installation recommended

Mere vodnega vložka
Graf naraščanja trdote vode po pretočeni količini
bottom of page