MECHANICAL FILTER CARTRIDGES
KNITTED MECHANICAL INSERT POLYPROPYLENE
SX
We offer a wide range of inserts made of polypropylene sheaths wound on a polypropylene reinforced core, which ensures greater rigidity of the insert even at longer insert lengths. They are available in different filtration levels and dimensions. The inserts are suitable for removing sand, lime, rust and other mechanical particles. They are suitable as filtration or. pre-filtration in residential homes, industrial buildings ... Inputs are fundamental to drinking water. The polypropylene inserts and their chemical structures are suitable for the more demanding industrial environment. The MF model has flat support surface with SEBS antimicrobial technology. Models marked BX in CX have an O-ring seal.
Working conditions:
Max. temperature: 45°C
Min temperature: 4°C
Characteristics:
Suitable for drinking water
Outer polypropylene wraps
Inner hard core made of polypropylene
Exchange every 3-6 months
No maintenance required
BX
MECHANICAL INSERT WITH POLYESTER MESH
SX
BX
CX
A mechanical insert with a polyester washing mesh causes minimal pressure drop when filtering 50mcr particles. The inserts are made without gluing or seals. The polyester mesh is injected into the plastic housing and enables greater strength and resistance of the insert. The SX model has a flat seal with SEBS antimicrobial technology. BX and CX have an O-ring seal.
Working conditions:
Max. temperature: 45°C
Min temperature: 4°C
Characteristics:
Suitable for drinking water
Polyester mesh
Other plastic parts made of polypropylene
Flat seals with microbiological protection
Exchange for 24 months
Need to wash once a month
MECHANICAL INSERT WITH RINSING GRID
A mechanical insert with a polyester washing mesh causes a minimal pressure drop when filtering 50-60mcr particles. The inserts are made without gluing or seals. The polyester mesh is injected into the plastic housing and enables greater strength and resistance of the insert
Working conditions:
Max. temperature: 45°C
Min temperature: 4°C
Characteristics :
Suitable for drinking water
Polyester mesh
Other plastic parts made of polypropylene
Flat seals with microbiological protection
Exchange for 24 months
Need to wash once a month
EXTRUDED MECHANICAL EPP (Expanded Polypropylene) WATER CARTRIDGE
CPP extruded inserts are manufactured with high process precision. Complete automation of the entire production line from production to packaging of the product without operator contact ensures complete hygienic safety. drinking water regulations. The BM-HOT cartridge with 25 mcr filtration can withstand up to 80 °C
Working conditions:
Max. temperature:
MB: 45°C
MB-HOT: 80°C
Min temperature: 4°C
Characteristics:
Material: polypropylene
Suitable for drinking water
Exchange every 6 months
Maintenance is not required
MECHANICAL WATER INLET WITH STAINLESS STEEL GRID
Stainless steel mesh inserts (AISI 304) ensure smooth flow and minimal pressure drop. Suitable for filtering coarser particles than pre-filter. The standard filtration is 70 mcr, but of course we offer 100, 200 and 500 mcr filtrations in our program. The mesh is washable and the insert boasts a very long service life. The SX model has a flat seal with SEBS antimicrobial technology. The marked and CX models have an oring seal.
Working conditions:
Max. temperature: 80°C
Min temperature: 4°C
Features:
Material: polypropylene + INOX
Suitable for drinking water
Exchange every 3-5 years
Rinsing the insert 1x a month