top of page

AUTOMATIC SOFTENING DEVICES BASED ON ION EXCHANGE 

TECHNICAL INFORMATION

  • Operation: based on ionic mass (cation).

  • Inlet and outlet connection of softener: ¾''

  • Minimum inlet pressure: 2.5 bar

  • Maximum inlet pressure: 6 bar

  • Electrical connection: 230 V, 50 Hz.

  • Minimum water temperature: + 5° C

  • Maximum water temperature: + 40° C

  • Water softening action based on ion exchange with the help of cation mass.

  • Regeneration: salt (tablet salt - NaCl)

  • Operation: automatic (time and volumetric)

  • We set the water hardness with the help of the by-pass, which is an integral part of the device.

The softener is ion-exchange based on cationic mass. The hardness of the water can be adjusted by the by-pass, which is an integral part of the device.

 EKO - BS with separate salt container

TECHNICAL INFORMATION

  • Min. inlet pressure: 2.5 bar

  • Max inlet pressure: 6 bar

  • Electrical connection: 230V, 50 Hz

  • Max water temperature: +40 °C

  • Min water temperature: +5 °C

  • Regeneration: Tableted salt - NaCl

  • Operation: Automatic (Time and Volumetric)

The softener works on the basis of ion exchange with the help of mass cations. The water hardness can be adjusted with the help of the bypass valve (by-pass), which is an integral part of the device.

 JUPITER CAB AND JUPITER ATL

The automatic softening device makes it possible to achieve, with the help of the ionic mass of the cation, that there is no limescale in the water. It has automatic valve control with digital time or volume control. Intended use: for home and industrial scale protection.

Warning: It is always necessary to install a mechanical pre-filter. At the outlet of the softener, it is necessary to install an anti-corrosion softener with polyphosphate.

WORKING CONDITIONS:

Max working pressure ………………. 6 BARS

Min working pressure ………………. 2 BARS

Max working temperature ……… 50°C

Max content of Fe ………………. 0.1 ppm

Max content of free Cl ………….0.5 ppm

 

It is not harmful and suitable for drinking water if installed and connected correctly.

Valve control: NORYL - automatic Autotrol 255/740 with digital timer.

Container: fiberglass reinforced with polyethylene.

Salt container: polyethylene.

Softener: strong cation mass.

Electric voltage of the timer: 12 Volt

Power consumption: 3 Watt

Material for regeneration: (NaCl).

 JUPITER DUPLEX AUTOMATIC SOFTENING DEVICE

Double automatic softener with ion exchange and double valve volume control JUPITER DUPLEX - AV AVM.

bottom of page