COMBINED FILTER INSERTS
COMBINED MECHANICAL-CARBON ECO-BT PP LA
The insert is made of two parts. The first part is extruded polypropylene, which removes mechanical particles between 5 and 25 mcr in size. The second part is a plastic container with granular activated carbon, which acts as protection against chlorine, pesticides, insecticides and improves the smell and taste of water.
Working conditions:
Max. temperature: 45 ° C
Low temperature: 4 ° C
Features:
Suitable for drinking water
Polypropylene housing
Replacing the cartridge on 3 months
Activated charcoal is made from coconut shell
SX seal: SEBS with microbiological protection
COMBINED INSERT KNITTED POLYPROPYLENE WITH POLYPHOSPHATE CRYSTALS
Inserts made of polypropylene wraps wound on a polypropylene reinforced core they provide greater stiffness of the insert even at longer insert lengths. The cartridge is filled in the core with polyphosphate crystals that prevent the deposition of limescale on the heater bodies, pipelines, taps .. The inserts are suitable for removing small particles sand, lime, rust and other mechanical particles. They are suitable as filtration or. pre-filtration in residential houses, industrial buildings for drinking water. Polypropylene inserts are also suitable for industrial environments due to their chemical physical structure. The SX model has a flat seal with SEBS antimicrobial technology.
Working conditions:
Max. temperature: 45 ° C
Low temperature: 4 ° C
Features:
Suitable for drinking water
Polypropylene wraps
Other plastic parts of polypropylene
With polyphosphatic crystals in the core
Flat seals with microbiological protection
Change to 6 months
COMBINED INSERT KNITTED POLYPROPYLENE WITH GRANULAR ACTIVATED CHARCOAL
It's a stake from polypropylene wrappers wound on a polypropylene reinforced core that provides greater stiffness of the insert even at longer insert lengths. The cartridge is filled in the core with granulated coconut shell activated carbon. Activated charcoal improves the smell and taste of water and at the same time acts as protection against chlorine, pesticides, insecticides and organic compounds ... The input is appropriate to remove fine particles sand, lime, rust and other mechanical particles as filtration or. pre-filtration in residential houses, industrial buildings for drinking water. The SX model has a flat seal with SEBS antimicrobial technology.
Working conditions:
Max. temperature: 45 ° C
Low temperature: 4 ° C
Features:
Suitable for drinking water
Polypropylene wraps
Other plastic parts of polypropylene
With granulated activated carbon in the core
Flat seals with microbiological protection
Replacement every 6 months
COMBINED MECHANICAL INSERT WITH MESH AND SINTER ACTIVATED CARBON
In the mechanical part of the insert with a mesh is additionally installed cartridge with activated carbon
Working conditions:
Max. temperature: 45 ° C
Low temperature: 4 ° C
Features:
Suitable for drinking water
Polyester mesh
Other plastic parts of polypropylene
Flat seals with microbiological protection
Change to 24 months
Need to wash 1x on month