ECO TRIPEX MAGO-ECO-FOS 20

USE

Triple house filter EKO-TRIPLEX MAGO EKO - FOS 20 is an ideal solution for water protection at the entrance of water into the building: a residential house or apartment. Drinking water filtration, protection for taps, shower, toilet bowls, water heater, washing machine, piping and  to protect other household appliances.

​

DESCRIPTION

A 60 mcr mechanical filter cartridge and a magnetic limescale neutralizer are installed in the first filter pot. The filter pot has a faucet at the bottom for backwashing solid particles in the water, thus extending the life of the mechanical filter cartridge and at the same time reducing the cost of maintaining the filter.

​

A filter cartridge with 25 mcr filtration is installed in the second filter pot and has an anti-corrosion agent inserted in the middle of the cartridge. The insert prevents the entry of all solid particles in the water that are larger than 25 mcr and has an anti-corrosion effect. Recommended replacement of cartridges every six months.

A CARBON BLOCK 5 mcr activated carbon filter cartridge is installed in the third filter pot. height 20 '' and is an ideal solution for protecting water against chlorine, pesticides, insecticides, improves the smell and taste of water while retaining all solid particles larger than 5 microns. The recommended replacement of cartridges is six months. As an integral part are also included: filter wrench, wall filter bracket and screws for mounting the wall bracket on the filter head.

​

​

MAINTENANCE AND INSTALLATION

Installation should be performed by a professionally qualified person. During installation, the filter must be sealed with Teflon.  It can be mounted directly behind the water meter or in front of the water users themselves. The use of flexible hoses is mandatory!

​

In case of high pressure in the water supply system and possible fluctuations, it is necessary to install a valve to regulate the pressure with a manometer. In case the filter is installed behind a water pump or if a radiator is installed behind the filter, it is necessary to install a non-return valve behind the filter.

​

If the filter pot falls to the floor, it must be replaced with a new one, despite the invisible damage, as micro damage that is invisible to the eye can occur.

​

After installing the filter or changing the cartridges, let the water run into the outlet for 5-7 minutes, only then can you use the water. Plastic and brass water filters and components of these materials which come into contact with drinking water shall be manufactured in accordance with Directive 80/778 / EEC for consumption and production procedure.

Plastic and brass water filters and components of these materials which come into contact with drinking water shall be manufactured in accordance with Directive 80/778 / EEC for consumption and production procedure.

​

The filter connections are: 19.05 mm (3/4 ''), 25.4 mm (1 '')

Max. operating temperature: 30 ° C

Max. working pressure at cold water: 7 bar

Sealing: O-ring