ECO TRIPEX MAGO-ECO-FOS HOUSE FILTER

USE

Triple house filter EKO-TRIPLEX MAGO EKO - FOS is an ideal solution for water protection at the entrance of water into the building: a residential house or apartment.

​

A 60 mcr mechanical filter cartridge and a magnetic limescale neutralizer are installed in the first filter pot. The filter pot has a faucet at the bottom for backwashing solids in the water, thus extending the life of the mechanical filter cartridge and at the same time reducing the cost of maintaining the filter.

 

DESCRIPTION

The mechanical filter cartridge retains all solid particles in the water larger than 60 microns.

The magnetic limescale neutralizer, located in the middle of the first filter head, is designed to protect against limescale and ferromagnetic particles in the water.

 

A filter cartridge with 25 mcr filtration is installed in the second filter pot and has a

anti-corrosion agent. The insert prevents the entry of all solid particles in the water that are larger than 25 mcr and has an anti-corrosion effect. Recommended replacement of cartridges every six months.

 

In the third filter pot, the CARBON BLOCK 5 mcr activated carbon filter cartridge is installed and is the ideal solution for protecting water against chlorine, pesticides, insecticides,  improves the smell and taste of water while retaining all solid particles larger than 5 microns. The recommended replacement of cartridges is six  months. As an integral part are also included: filter key, wall filter bracket and  screws to mount the wall bracket to the filter head.

​

Application: Drinking water filtration, protection for taps, shower, toilet bowls, water heater, washing machine, piping and  to protect other household appliances.

​

MAINTENANCE AND INSTALLATION

Installation should be performed by a professionally qualified person. During installation, the filter must be sealed with Teflon.  It can be mounted directly behind the water meter or in front of the water users themselves. The use of flexible hoses is mandatory!

​

In case of high pressure in the water supply system and possible fluctuations, it is necessary to install a valve to regulate the pressure with a manometer. In case the filter is installed behind a water pump or if a radiator is installed behind the filter, it is necessary to install a non-return valve behind the filter.

​

If the filter pot falls to the floor, it must be replaced with a new one, despite the invisible damage, as micro damage that is invisible to the eye can occur.

​

After installing the filter or changing the cartridges, let the water run into the outlet for 5-7 minutes, only then can you use the water. Water filters made of plastic and brass and components of these materials which come into contact with drinking water shall be manufactured in accordance with Directive 80/778 / EEC for consumption and production procedure.

 

Water filters made of plastic and brass and components of these materials which come into contact with drinking water shall be manufactured in accordance with Directive 80/778 / EEC for consumption and production procedure.