EKOM SAMMAG

USE

It is used for drinking water, as well as for water intended for technological use. Protects fittings, plumbing, taps and appliances for household, industry, pharmacy, etc.

​

The filter has a ball valve mounted on the lower part of the pot, which is opened at least once a month by removing solid particles located in the filter itself. Rinsing the filter cartridge is performed as follows: Close the water supply and then open the tap at the bottom of the filter so that the pressure from the house system backwashes the filter cartridge, then reopen the valve in front of the filter. For better filter permeability and cleanliness, this rinsing process can be repeated several times in a row.

​

DESCRIPTION

• The magnetic neutralizer is located in the middle of the filter housing and the cartridge filter. It works on the principle of the magnetic field of high-energy permanent magnets. It works successfully without chemical impact on water, eliminates the accumulation of limescale, corrosion of iron and at the same time decomposes existing limescale on water installations and devices (prevents binding).

​

• The mechanical filter cartridge retains all solid particles in water larger than 60 microns (sand, sludge, sawdust).

​

KIT CONTAINS

• SAMMAG home filter  (housing + magnetic neutralizer + mechanical insert)

• Cartridge filter key

• Wall filter bracket

• Screws to mount the wall bracket to the filter head

​

MAINTENANCE AND INSTALLATION

Replacement of the self-cleaning cartridge during regular maintenance is required every 12 months. Installation is possible directly behind the water meter. Installation should be performed by a professionally qualified person. During installation, it is necessary to seal with Teflon. Installation should be carried out in a bypass. The use of flexible hoses is mandatory. The filter must be installed in such a way that it is protected from external environmental influences (sun, rain, high temperatures or temperatures below 5 ° C)

Water filters made of plastic and brass and components of these materials which come into contact with drinking water shall be manufactured in accordance with Directive 80/778 / EEC for consumption and production procedure.

CONDITIONS FOR OPERATION AND INSTALLATION

​

• The filter connections are: 19.05 mm (3/4 ''), 25.4 mm (1 '')

• Possible filter heights:  254mm (10 ") and 127mm (5")

• Max. operating temperature: 30 ° C

• Max. working pressure at cold water: 7 bar

• Minimum operating pressure: 2 bar

• Sealing: O-ring

• Insert type: SX