MECHANICAL FILTER FOR HOT WATER 25μ
DESCRIPTION
Mechanical filter cartridges retain in water all solid particles larger than 25 mcr (sand, silt, sawdust). It is used for drinking water, as well as for water intended for technological use. Protects fittings, plumbing, taps and appliances for household, industry, pharmacy, etc.
KIT CONTAINS
House filter MF 25 HOT (housing + mechanical insert)
Cartridge filter key
Wall filter bracket with screws
Screws to mount the wall bracket to the filter head
MAINTENANCE AND INSTALLATION
Mechanical insert should be replaced every 6 months, The filter must be opened after 3 months of use and cleaned with water. Installation is possible directly behind the water meter. Installation should be performed by a professionally qualified person. During installation, it is necessary to seal with Teflon. Installation should be carried out in a bypass. The use of flexible hoses is mandatory. The filter must be installed in such a way that it will be protected from external environmental influences (sun, rain, high temperatures or temperatures below 5 ° C)
Plastic and brass water filters and components of these materials which come into contact with drinking water shall be manufactured in accordance with Directive 80/778 / EEC for consumption and production procedure. Filter cartridges for mechanical cleaning are manufactured according to EU standards, EEC 80/778.
CONDITIONS FOR OPERATION AND INSTALLATION
Max. operating temperature: 80 ° C
Max. working pressure at cold water: 7 bar
MECHANICAL FILTER FOR HOT WATER
TECHNICAL INFORMATION
ADVANTAGES OF THE FILTER
One-stage particle filtration from 25 mcr
Allows filtration of hot water up to 80 ° C
REPLACEMENT FILTER INSERTS
Mechanical insert for hot water
filtration rate: 25mcr
Size: 9.75 "
code: 38300170 83997
FILTER INSTALLATION ACCESSORIES
