FUNCTION

​

The magnetic dirt separator is an excellent solution to address various system issues caused by impurities in the water (especially rust and sand), which form due to corrosion and scaling during normal operation of a heating system. The filter provides continuous protection for the boiler by preventing the circulation of these microparticles in the system, thereby preserving sensitive components such as the circulation pump and heat exchanger. It should be installed on the return circuit, at the boiler inlet. Thanks to its versatile installation options, it can be mounted horizontally or vertically, making it suitable even for tight spaces like kitchen cabinets.

​

​OPERATING CONDITIONS

• Compatible fluids: Water, water + glycol mixtures

• Operating pressure: 6 bar

• Operating temperature: 4–90 °C

​

​

 

⚠️ INSTALLATION WARNINGS

• The filter must be installed by a qualified technician.

• Carefully read the "Installation, Use, and Maintenance Manual" before installation and keep it near the filter.

• Before installation or maintenance, ensure the circuit is isolated.

• Install the filter on the return circuit, at the boiler inlet.

• Ensure adequate access for future maintenance or repairs.

• Make sure the system is properly built before proceeding with installation.

• If pressure exceeds 3 bar, install a pressure reducer upstream of the filter.

• If water hammer is present, install an expansion damping vessel downstream of the filter.

• Use only original spare parts.

​

Plastic and brass water filters and components of these materials which come into contact with drinking water shall be manufactured in accordance with Directive 80/778 / EEC for consumption and production procedure. Filter cartridges for mechanical cleaning are manufactured according to EU standards, EEC 80/778.