top of page

SELF-CLEANING MECHANICAL FILTER FOR HEAT PUMP

HEIGHT 10 "

Filter za topotno črpalko 10" višine

HEIGHT 20 "

Filter za topotno črpalko 20" višine

USE

filtering for heat pumps, protection for taps, water heaters, washing machines, pipelines and for the protection of other household appliances. Protection against mechanical and ferromagnetic particles in water. The filter has a ball valve mounted on the lower part of the pot, which is opened once a month by removing solid particles located in the filter itself. Rinsing the filter cartridge is performed as follows: Close the water supply and then open the faucet at the bottom of the filter so that the pressure from the house system backwashes the filter cartridge, then open the valve in front of the filter again. For better filter cartridge permeability and cleanliness, the rinsing process can be repeated several times in a row.

DESCRIPTION

  • A mechanical filter cartridge of 150 mcr is installed in the filter pot for heat pumps. The filter pot has a faucet at the bottom for backwashing solids in the water. This extends the life of the mechanical filter cartridge and at the same time reduces the cost of maintaining the filter. The mechanical filter cartridge retains in water all solid particles larger than 150 mcr

KIT CONTAINS

  • Self-cleaning house filter  (housing + insert with mesh 150mcr)

  • Cartridge filter key

  • Wall filter bracket with screws

  • Screws to mount the wall bracket to the filter head

MAINTENANCE AND INSTALLATION

Installation is possible directly behind the water meter. Installation should be performed by a professionally qualified person. During installation, it is necessary to seal with Teflon. Installation should be carried out in a bypass. The use of flexible hoses is mandatory. The filter must be installed in such a way that it will be protected from external environmental influences (sun, rain, high temperatures or temperatures below 4 ° C)

 

Plastic and brass water filters and components of these materials which come into contact with drinking water shall be manufactured in accordance with Directive 80/778 / EEC for consumption and production procedure.  Filter cartridges for mechanical cleaning are manufactured according to EU standards, EEC 80/778.

MECHANICAL WATER FILTER

Skica ohišja eko green line

TECHNICAL INFORMATION

  • The filter connections are: 12.7 mm (½ ''), 19.05 mm (3/4 ''), 25.4 mm (1 ''), 38.1 mm (6/4 ''), 50, 8mm (R2)

  • Possible heights and type of insert: 254mm (10 ") and 505mm (20")

  • Max. operating temperature: 30 ° C

  • Max. working pressure at cold water: 7 bar

  • Sealing: O-ring​

ADVANTAGES OF THE FILTER

  • One-stage  particle filtration from 150  mcr   

  • Easy backwash of the cartridge without replacement

  • Replacing the cartridge on 24  months    

REPLACEMENT FILTER INSERTS

Mehanski vložek z mrežico 150 mcr

10 "mesh mechanical insert

  • filtration rate: 150mcr

  • Size: 10 "

  • code:  38300170 82426

Mechanical insert with mesh 20 "

  • filtration rate: 150mcr

  • Size: 20 "

  • code:  3830017085243

FILTER INSTALLATION ACCESSORIES

nosilec filtra
ključ filtra

CINTROPUR WATER FILTERS

Cintropur water filters eliminate solid particles by two-stage filtration: water vortex and filter bag. By swirling the water, solid particles are removed from the water by centrifugal force and settle to the bottom of the filter, thus reducing the load on the filter bag. The filters are made of materials that are resistant to corrosion and rust and are suitable for use with food and drinking water.

CINTROPUR NW 32

CINTROPUR NW 32

 TABELA CINTROPUR NW 32
VODNI FILTER CINTORPUR NW 500

CINTROPUR NW 500

Preglednica za voni filter cintorpur NW 500
Vodni filter cintorpur NW 650

CINTROPUR NW 650

Preglednica za vodni filter cintorpr NW 650
Vodni filter Cintorur NW 800

CINTROPUR NW 800

Preglenica za vodni filter cintorpur NW 800
bottom of page