EKO BY PASS - TWIN-SAM DOUBLE HOME WATER FILTER WITH MAGNETIC NEUTRALIZER
USE
The multi-function filter head allows you to perform normal water filtration, bypass maintenance, water shut-off and backwashing without installing additional valves. The filter head can also be set to the BY - PASS head position, so that the water flow passes the filter insert. You can also place the head in a position that prevents the flow of water on the inlet side and the outlet side of the filter.
DESCRIPTION
A 60 mcr mechanical filter cartridge is installed in the first filter pot. The filter has a ball valve installed on the lower part of the first pot, which is opened at least once a month in order to remove solid particles located in the filter itself. The filter cartridge is rinsed as follows: Open the ball valve at the bottom of the filter pot and release the solid particles that are at the bottom of the filter pot. The mechanical filter cartridge retains all solid particles in the water that are larger than 60 microns.
The magnetic neutralizer is placed in the middle of the second pot and the cartridge filter. It works on the principle of the magnetic field of high-energy permanent magnets. It works successfully without any chemical effect on the water. Eliminates scale build-up, iron corrosion and at the same time destroys existing scale on pipes and water devices (prevents binding).
The activated charcoal CB (carbon block) filter insert retains all solid particles in the water larger than 10 microns (sand, silt, sawdust) and is an ideal protection against: chlorine, pesticides, insecticides, improves the smell and taste of water. It is used for drinking water, as well as for water intended for technological use. Protects fittings, plumbing, taps and devices for household, industry, pharmacy, heating elements, etc.
MAINTENANCE AND INSTALLATION
Installation should be carried out by a professionally qualified person. During installation, the filter must be sealed with Teflon. It can be installed directly behind the water meter or in front of the water users themselves. The use of flexible hoses is mandatory!
In case of high pressure in the water supply system and possible fluctuation, it is necessary to install a valve for regulating the pressure with a manometer. If the filter is installed behind the water pump or if a heating element is installed behind the filter, a non-return valve must be installed behind the filter.
If the filter pot falls on the floor, it must be replaced with a new one despite the invisible damage, as micro-damages that are invisible to the eye can occur.
After installing the filter or after changing the cartridges, let the water flow into the outlet for 5-7 minutes before you can use the water. The water filter made of plastic and brass and the components of these materials that have contact with drinking water are manufactured in accordance with the directive 80/778/EEC for consumption and production procedure.
The water filter made of plastic and brass and the components of these materials that have contact with drinking water are manufactured in accordance with the directive 80/778/EEC for consumption and production procedure.
TECHNICAL INFORMATION
Filter connections are: 19.05 mm (3/4''), 25.4 mm (1'')
Max. working temperature: 30° C
Max. working pressure with cold water: 7 bar
Sealing: O-ring
FILTER ADVANTAGES
Double house filter with BYPASS system
Two-stage particle filtration size 50 and 10 mcr
Enostavna montaža, _cc781905-5cde-3194-bb3b -136bad5cf58d_
During installation, the installation of valves before and after the filter is not necessary,
Making a by-pass is not necessary as it is built into the multi-function filter head,
The tap located at the bottom of the pot allows the cartridge to be rinsed without opening the housing, thus extending the life of the filter cartridge.
The magnetic neutralizer eliminates scale build-up, iron corrosion and destroys existing scale on water pipes and fixtures.
The activated carbon cartridge acts as protection against chlorine, pesticides and insecticides
REPLACEMENT FILTER INPUTS
SETTINGS
1. Normal mode: water filtering
To initiate the BY-PASS system filtration in filtration mode, turn the selector knob so that the symbols in the image above line up with the arrows on the blue housing that indicate water flow. We get filtered water at the exit.
2. Maintenance: BY-PASS
To establish the BY-PASS function, it is necessary to turn the selection knob clockwise so that the upper symbol aligns with the arrows on the housing, which indicate the direction of the water flow. Unfiltered water flows at the filter outlet, the housing has no contact with water.
3. Closed input and output connection
For the closing mode, it is necessary to turn the selection knob so that the upper symbol is aligned with the triggers on the housing, which show the direction of the water flow. The supply path is closed. The internal pressure is reduced by means of a tap at the bottom of the pot. When changing the position, close the tap again.
3. Closed input and output connection
For the closing method, it is necessary to turn the selection knob so that the upper symbol is aligned with the triggers on the housing, which show the direction of the water flow.
The inlet is closed. The internal pressure is reduced by means of a tap at the bottom of the pot. When changing the position, we close the tap again.