CENTRO MAG - CB

USE

CENTRO MAG - CB central house filter system consists in the first part of
a centrifugal solids separator used to remove fine crystalline solids in water. It is used in the household and in industry to protect large plumbing systems.

​

​

DESCRIPTION

​

With the help of a magnetic plasticizer (NEUTRALIZER) we achieve that the substances of limescale and other solid particles in the water get the desired structure for excretion. It works without harmful consequences and changes in the chemical composition of water. The separator can also be used as a stand-alone mechanical filter. The device eliminates all mechanical particles larger than 5 mcr. Its efficiency is up to 75 percent.

​

In the second part of the filter system, a magnetic limescale neutralizer is installed in the housing in the middle of the filter and is intended for protection against limescale. CB - carbon block 5 mcr activated carbon filter cartridge is installed in the same filter pot and is designed to protect against: chlorine, pesticides and secticides, improves the smell and taste of water and retains all solid particles in water larger than 5 mcr. ​

​

KIT CONTAINS

• CarBON BLOCK home filter  (housing + cartridge activated carbon 5mcr)

• Centrifugal particle separator

• Cartridge filter key

• Wall filter bracket with screws

• Screws to mount the wall bracket to the filter head

​

MAINTENANCE AND INSTALLATION

WE RECOMMEND: To install the device behind a water meter that measures water consumption, or in front of taps, showers, water heaters, dishwashers, washing machines, central heating boilers, medical equipment, catering equipment (it is recommended to install a magnetic softener NEUTRALIZER). If possible, install a transparent pot on the device (in the part where the excretion is marked), with the help of which the excretion of solid particles will be visible. Install a ball valve at the bottom of the pot to drain the secretions. The separator is made of brass and plastic and is surface treated. Installation should be carried out in a vertical position and in the manner indicated on the device with the directions for INPUT, OUTPUT and EXCLUSION.

The installation of the device should be performed by a professionally qualified person. The valve for discharging secretions is opened at least once a month or if necessary, depending on the quality and quantity of water used. The CB - activated carbon 5 mcr filter cartridge is replaced with a new one every 6 months.

​

Water filters made of plastic and brass and components of these materials which come into contact with drinking water shall be manufactured in accordance with Directive 80/778 / EEC for consumption and production procedure. Installation should be performed by a professionally qualified person. When installing the filter, it is necessary to seal with Teflon. Installation should be carried out in the bypass line (by belt). The use of flexible hoses is mandatory during installation.

​